BUCKET

When objects are called shards

In this document:

• commands to read, write, extract, and list archives - objects formatted as TAR, TGZ (or TAR.GZ) , ZIP, or TAR.LZ4.

For the most recently updated list of supported archival formats, please refer to this source.

The corresponding subset of CLI commands starts with ais archive, from where you can <TAB-TAB> to the actual (reading, writing, etc.) operation.

$ ais archive --help

NAME:
   ais archive get - get a shard and extract its content; get an archived file;
              write the content locally with destination options including: filename, directory, STDOUT ('-'), or '/dev/null' (discard);
              assorted options further include:
              - '--prefix' to get multiple shards in one shot (empty prefix for the entire bucket);
              - '--progress' and '--refresh' to watch progress bar;
              - '-v' to produce verbose output when getting multiple objects.
   'ais archive get' examples:
              - ais://abc/trunk-0123.tar.lz4 /tmp/out - get and extract entire shard to /tmp/out/trunk/*
              - ais://abc/trunk-0123.tar.lz4 --archpath file45.jpeg /tmp/out - extract one named file
              - ais://abc/trunk-0123.tar.lz4/file45.jpeg /tmp/out - same as above (and note that '--archpath' is implied)
              - ais://abc/trunk-0123.tar.lz4/file45 /tmp/out/file456.new - same as above, with destination explicitly (re)named
   'ais archive get' multi-selection examples:
              - ais://abc/trunk-0123.tar 111.tar --archregx=jpeg --archmode=suffix - return 111.tar with all *.jpeg files from a given shard
              - ais://abc/trunk-0123.tar 222.tar --archregx=file45 --archmode=wdskey - return 222.tar with all file45.* files --/--
              - ais://abc/trunk-0123.tar 333.tar --archregx=subdir/ --archmode=prefix - 333.tar with all subdir/* files --/--

USAGE:
   ais archive get [command options] BUCKET[/SHARD_NAME] [OUT_FILE|OUT_DIR|-]

OPTIONS:
   --checksum           validate checksum
   --yes, -y            assume 'yes' to all questions
   --latest             check in-cluster metadata and, possibly, GET, download, prefetch, or copy the latest object version
                        from the associated remote bucket:
                        - provides operation-level control over object versioning (and version synchronization)
                          without requiring to change bucket configuration
                        - the latter can be done using 'ais bucket props set BUCKET versioning'
                        - see also: 'ais ls --check-versions', 'ais cp', 'ais prefetch', 'ais get'
   --refresh value      time interval for continuous monitoring; can be also used to update progress bar (at a given interval);
                        valid time units: ns, us (or µs), ms, s (default), m, h
   --progress           show progress bar(s) and progress of execution in real time
   --blob-download      utilize built-in blob-downloader (and the corresponding alternative datapath) to read very large remote objects
   --chunk-size value   chunk size in IEC or SI units, or "raw" bytes (e.g.: 4mb, 1MiB, 1048576, 128k; see '--units')
   --num-workers value  number of concurrent blob-downloading workers (readers); system default when omitted or zero (default: 0)
   --archpath value     extract the specified file from an object ("shard") formatted as: .tar, .tgz or .tar.gz, .zip, .tar.lz4;
                        see also: '--archregx'
   --archmime value     expected format (mime type) of an object ("shard") formatted as: .tar, .tgz or .tar.gz, .zip, .tar.lz4;
                        especially usable for shards with non-standard extensions
   --archregx value     string that specifies prefix, suffix, substring, WebDataset key, _or_ a general-purpose regular expression
                        to select possibly multiple matching archived files from a given shard;
                        is used in combination with '--archmode' ("matching mode") option
   --archmode value     enumerated "matching mode" that tells aistore how to handle '--archregx', one of:
                          * regexp - general purpose regular expression;
                          * prefix - matching filename starts with;
                          * suffix - matching filename ends with;
                          * substr - matching filename contains;
                          * wdskey - WebDataset key
                        example:
                          given a shard containing (subdir/aaa.jpg, subdir/aaa.json, subdir/bbb.jpg, subdir/bbb.json, ...)
                          and wdskey=subdir/aaa, aistore will match and return (subdir/aaa.jpg, subdir/aaa.json)
   --extract, -x        extract all files from archive(s)
   --inventory          list objects using _bucket inventory_ (docs/s3inventory.md); requires s3:// backend; will provide significant performance
                        boost when used with very large s3 buckets; e.g. usage:
                          1) 'ais ls s3://abc --inventory'
                          2) 'ais ls s3://abc --inventory --paged --prefix=subdir/'
                        (see also: docs/s3inventory.md)
   --inv-name value     bucket inventory name (optional; system default name is '.inventory')
   --inv-id value       bucket inventory ID (optional; by default, we use bucket name as the bucket's inventory ID)
   --prefix value       get objects that start with the specified prefix, e.g.:
                        '--prefix a/b/c' - get objects from the virtual directory a/b/c and objects from the virtual directory
                        a/b that have their names (relative to this directory) starting with 'c';
                        '--prefix ""' - get entire bucket (all objects)
   --cached             get only in-cluster objects - only those objects from a remote bucket that are present ("cached")
   --archive            list archived content (see docs/archive.md for details)
   --limit value        maximum number of object names to display (0 - unlimited; see also '--max-pages')
                        e.g.: 'ais ls gs://abc --limit 1234 --cached --props size,custom (default: 0)
   --units value        show statistics and/or parse command-line specified sizes using one of the following _units of measurement_:
                        iec - IEC format, e.g.: KiB, MiB, GiB (default)
                        si  - SI (metric) format, e.g.: KB, MB, GB
                        raw - do not convert to (or from) human-readable format
   --verbose, -v        verbose output
   --silent             server-side flag, an indication for aistore _not_ to log assorted errors (e.g., HEAD(object) failures)
   --help, -h           show help

Table of Contents

• Archive files and directories
• Append files and directories to an existing archive
• Archive multiple objects
• List archived content
• Get archived content
• Get archived content: multiple-selection
• Generate shards

Archive files and directories

Archive multiple files.

$ ais archive put --help
NAME:
   ais archive put - archive a file, a directory, or multiple files and/or directories as
     (.tar, .tgz or .tar.gz, .zip, .tar.lz4)-formatted object - aka "shard".
     Both APPEND (to an existing shard) and PUT (a new version of the shard) are supported.
     Examples:
     - 'local-filename bucket/shard-00123.tar.lz4 --append --archpath name-in-archive' - append file to a given shard,
        optionally, rename it (inside archive) as specified;
     - 'local-filename bucket/shard-00123.tar.lz4 --append-or-put --archpath name-in-archive' - append file to a given shard if exists,
        otherwise, create a new shard (and name it shard-00123.tar.lz4, as specified);
     - 'src-dir bucket/shard-99999.zip -put' - one directory; iff the destination .zip doesn't exist create a new one;
     - '"sys, docs" ais://dst/CCC.tar --dry-run -y -r --archpath ggg/' - dry-run to recursively archive two directories.
     Tips:
     - use '--dry-run' option if in doubt;
     - to archive objects from a ais:// or remote bucket, run 'ais archive bucket', see --help for details.

USAGE:
   ais archive put [command options] [-|FILE|DIRECTORY[/PATTERN]] BUCKET/SHARD_NAME

The operation accepts either an explicitly defined list or template-defined range of file names (to archive).

NOTE:

• ais archive put works with locally accessible (source) files and shall not be confused with ais archive bucket command (below).

Also, note that ais put command with its --archpath option provides an alternative way to archive multiple objects:

For the most recently updated list of supported archival formats, please see:

• this source.

Append files and directories to an existing archive

APPEND operation provides for appending files to existing archives (shards). As such, APPEND is a variation of PUT (above) with additional two boolean flags:

Name	Description
--append	add newly archived content to the destination object ("archive", "shard") that must exist
--append-or-put	if destination object ("archive", "shard") exists append to it, otherwise archive a new one

Example 1: add file to archive

step 1. create archive (by archiving a given source dir)

$ ais archive put sys ais://nnn/sys.tar.lz4
Warning: multi-file 'archive put' operation requires either '--append' or '--append-or-put' option
Proceed to execute 'archive put --append-or-put'? [Y/N]: y
Files to upload:
EXTENSION        COUNT   SIZE
.go              11      17.46KiB
TOTAL            11      17.46KiB
APPEND 11 files (one directory, non-recursive) => ais://nnn/sys.tar.lz4? [Y/N]: y
Done

step 2. add a single file to existing archive

$ ais archive put README.md ais://nnn/sys.tar.lz4 --archpath=docs/README --append
APPEND README.md to ais://nnn/sys.tar.lz4 as "docs/README"

step 3. list entire bucket with an --archive option to show all archived entries

$ ais ls ais://nnn --archive
NAME                             SIZE
sys.tar.lz4                      16.84KiB
    sys.tar.lz4/api_linux.go     1.07KiB
    sys.tar.lz4/cpu.go           1.07KiB
    sys.tar.lz4/cpu_darwin.go    802B
    sys.tar.lz4/cpu_linux.go     2.14KiB
    sys.tar.lz4/docs/README      13.85KiB
    sys.tar.lz4/mem.go           1.16KiB
    sys.tar.lz4/mem_darwin.go    2.04KiB
    sys.tar.lz4/mem_linux.go     2.81KiB
    sys.tar.lz4/proc.go          784B
    sys.tar.lz4/proc_darwin.go   369B
    sys.tar.lz4/proc_linux.go    1.40KiB
    sys.tar.lz4/sys_test.go      3.88KiB
Listed: 13 names

Alternatively, use regex to select:

$ ais ls ais://nnn --archive --regex docs
NAME                             SIZE
    sys.tar.lz4/docs/README      13.85KiB

Example 2: use --template flag to add source files

Generally, the --template option combines (an optional) prefix and/or one or more ranges (e.g., bash brace expansions).

In this case, the template we use is a simple prefix with no ranges.

$ ls -l /tmp/w
total 32
-rw-r--r-- 1 root root 14180 Dec 11 18:18 111
-rw-r--r-- 1 root root 14180 Dec 11 18:18 222

$ ais archive put ais://nnn/shard-001.tar --template /tmp/w/ --append
Files to upload:
EXTENSION        COUNT   SIZE
                 2       27.70KiB
TOTAL            2       27.70KiB
APPEND 2 files (one directory, non-recursive) => ais://nnn/shard-001.tar? [Y/N]: y
Done
$ ais ls ais://nnn/shard-001.tar --archive
NAME                                             SIZE
shard-001.tar                                    37.50KiB
    shard-001.tar/111                            13.85KiB
    shard-001.tar/222                            13.85KiB
    shard-001.tar/23ed44d8bf3952a35484-1.test    1.00KiB
    shard-001.tar/452938788ebb87807043-4.test    1.00KiB
    shard-001.tar/7925bc9b5eb1daa12ed0-2.test    1.00KiB
    shard-001.tar/8264574b49bd188a4b27-0.test    1.00KiB
    shard-001.tar/f1f25e52c5edd768e0ec-3.test    1.00KiB

Example 3: add file to archive

In this example, we assume that arch.tar already exists.

# contents _before_:
$ ais archive ls ais://abc/arch.tar
NAME                SIZE
arch.tar            4.5KiB
    arch.tar/obj1   1.0KiB
    arch.tar/obj2   1.0KiB

# add file to existing archive:
$ ais archive put /tmp/obj1.bin ais://abc/arch.tar --archpath bin/obj1
APPEND "/tmp/obj1.bin" to object "ais://abc/arch.tar[/bin/obj1]"

# contents _after_:
$ ais archive ls ais://abc/arch.tar
NAME                    SIZE
arch.tar                6KiB
    arch.tar/bin/obj1   2.KiB
    arch.tar/obj1       1.0KiB
    arch.tar/obj2       1.0KiB

Example 4: add file to archive

# contents _before_:

$ ais archive ls ais://nnn/shard-2.tar
NAME                                             SIZE
shard-2.tar                                      5.50KiB
    shard-2.tar/0379f37cbb0415e7eaea-3.test      1.00KiB
    shard-2.tar/504c563d14852368575b-5.test      1.00KiB
    shard-2.tar/c7bcb7014568b5e7d13b-4.test      1.00KiB

# append and note that `--archpath` can specify a fully qualified destination name

$ ais archive put LICENSE ais://nnn/shard-2.tar --archpath shard-2.tar/license.test
APPEND "/go/src/github.com/NVIDIA/aistore/LICENSE" to "ais://nnn/shard-2.tar[/shard-2.tar/license.test]"

# contents _after_:
$ ais archive ls ais://nnn/shard-2.tar
NAME                                             SIZE
shard-2.tar                                      7.50KiB
    shard-2.tar/0379f37cbb0415e7eaea-3.test      1.00KiB
    shard-2.tar/504c563d14852368575b-5.test      1.00KiB
    shard-2.tar/c7bcb7014568b5e7d13b-4.test      1.00KiB
    shard-2.tar/license.test                     1.05KiB

Archive multiple objects

This is a yet another archive-creating operation that:

1. takes in multiple objects from a given source bucket, and

2. archives them all as a shard in the specified destination bucket,

   where:

• source and destination buckets may not necessarily be different;
• both --list and --template options are supported
• supported archival formats include .tar, .tar.gz (or, same, .tgz), and .zip; more extensions may be added in the future.
• archiving is carried out asynchronously, in parallel by all AIS targets.

As such, ais archive bucket is one of the supported multi-object operations.

NOTE:

• ais archive bucket multi-object bucket-to-bucket archiving shall not be confused with ais archive put command - the latter is used to archive multiple source files from a local (or locally accessible) source directory.

$ ais archive bucket --help
NAME:
   ais archive bucket - archive multiple objects from SRC_BUCKET as (.tar, .tgz or .tar.gz, .zip, .tar.lz4)-formatted shard

USAGE:
   ais archive bucket [command options] SRC_BUCKET DST_BUCKET/SHARD_NAME

OPTIONS:
   --template value   template to match object or file names; may contain prefix (that could be empty) with zero or more ranges
                      (with optional steps and gaps), e.g.:
                      --template "" # (an empty or '*' template matches eveything)
                      --template 'dir/subdir/'
                      --template 'shard-{1000..9999}.tar'
                      --template "prefix-{0010..0013..2}-gap-{1..2}-suffix"
                      and similarly, when specifying files and directories:
                      --template '/home/dir/subdir/'
                      --template "/abc/prefix-{0010..9999..2}-suffix"
   --list value       comma-separated list of object or file names, e.g.:
                      --list 'o1,o2,o3'
                      --list "abc/1.tar, abc/1.cls, abc/1.jpeg"
                      or, when listing files and/or directories:
                      --list "/home/docs, /home/abc/1.tar, /home/abc/1.jpeg"
   --dry-run          preview the results without really running the action
   --include-src-bck  prefix the names of archived files with the source bucket name
   --append-or-put    if destination object ("archive", "shard") exists append to it, otherwise archive a new one
   --cont-on-err      keep running archiving xaction in presence of errors in a any given multi-object transaction
   --wait             wait for an asynchronous operation to finish (optionally, use '--timeout' to limit the waiting time)
   --help, -h         show help

Examples

1. Archive a list of objects from a given bucket:

$ ais archive bucket ais://bck/arch.tar --list obj1,obj2
Archiving "ais://bck/arch.tar" ...

Resulting ais://bck/arch.tar contains objects ais://bck/obj1 and ais://bck/obj2.

1. Archive objects from a different bucket, use template (range):

$ ais archive bucket ais://src ais://dst/arch.tar --template "obj-{0..9}"

Archiving "ais://dst/arch.tar" ...

ais://dst/arch.tar now contains 10 objects from bucket ais://src: ais://src/obj-0, ais://src/obj-1 ... ais://src/obj-9.

1. Archive 3 objects and then append 2 more:

$ ais archive bucket ais://bck/arch1.tar --template "obj{1..3}"
Archived "ais://bck/arch1.tar" ...
$ ais archive ls ais://bck/arch1.tar
NAME                     SIZE
arch1.tar                31.00KiB
    arch1.tar/obj1       9.26KiB
    arch1.tar/obj2       9.26KiB
    arch1.tar/obj3       9.26KiB

$ ais archive bucket ais://bck/arch1.tar --template "obj{4..5}" --append
Archived "ais://bck/arch1.tar"

$ ais archive ls ais://bck/arch1.tar
NAME                     SIZE
arch1.tar                51.00KiB
    arch1.tar/obj1       9.26KiB
    arch1.tar/obj2       9.26KiB
    arch1.tar/obj3       9.26KiB
    arch1.tar/obj4       9.26KiB
    arch1.tar/obj5       9.26KiB

List archived content

NAME:
   ais archive ls - list archived content (supported formats: .tar, .tgz or .tar.gz, .zip, .tar.lz4)

USAGE:
   ais archive ls [command options] BUCKET[/SHARD_NAME]

List archived content as a tree with archive (“shard”) name as a root and archived files as leaves. Filenames are always sorted alphabetically.

Options

Name	Type	Description	Default
--props	string	Comma-separated properties to return with object names	"size"
--all	bool	Show all objects, including misplaced, duplicated, etc.	false

Examples

$ ais archive ls ais://bck/arch.tar
NAME                SIZE
arch.tar            4.5KiB
    arch.tar/obj1   1.0KiB
    arch.tar/obj2   1.0KiB

Example: use ‘--prefix’ that crosses shard boundary

For starters, we recursively archive all aistore docs:

$ ais put docs ais://A.tar --archive -r

To list a virtual subdirectory inside this newly created shard (e.g.):

$ ais archive ls ais://nnn --prefix "A.tar/tutorials"
NAME                                             SIZE
    A.tar/tutorials/README.md                    561B
    A.tar/tutorials/etl/compute_md5.md           8.28KiB
    A.tar/tutorials/etl/etl_imagenet_pytorch.md  4.16KiB
    A.tar/tutorials/etl/etl_webdataset.md        3.97KiB
Listed: 4 names

or, same:

$ ais ls ais://nnn --prefix "A.tar/tutorials" --archive
NAME                                             SIZE
    A.tar/tutorials/README.md                    561B
    A.tar/tutorials/etl/compute_md5.md           8.28KiB
    A.tar/tutorials/etl/etl_imagenet_pytorch.md  4.16KiB
    A.tar/tutorials/etl/etl_webdataset.md        3.97KiB
Listed: 4 names

Get archived content

$ ais get --help

   ais get - (alias for "object get") get an object, a shard, an archived file, or a range of bytes from all of the above;
              write the content locally with destination options including: filename, directory, STDOUT ('-'), or '/dev/null' (discard);
              assorted options further include:
              - '--prefix' to get multiple objects in one shot (empty prefix for the entire bucket);
              - '--extract' or '--archpath' to extract archived content;
              - '--progress' and '--refresh' to watch progress bar;
              - '-v' to produce verbose output when getting multiple objects.

USAGE:
   ais get [command options] BUCKET[/OBJECT_NAME] [OUT_FILE|OUT_DIR|-]

OPTIONS:
   --offset value    object read offset; must be used together with '--length'; default formatting: IEC (use '--units' to override)
   --checksum        validate checksum
   --yes, -y         assume 'yes' to all questions
   --refresh value   interval for continuous monitoring;
                     valid time units: ns, us (or µs), ms, s (default), m, h
   --progress        show progress bar(s) and progress of execution in real time
   --archpath value  extract the specified file from an archive (shard)
   --extract, -x     extract all files from archive(s)
   --prefix value    get objects that start with the specified prefix, e.g.:
                     '--prefix a/b/c' - get objects from the virtual directory a/b/c and objects from the virtual directory
                     a/b that have their names (relative to this directory) starting with c;
                     '--prefix ""' - get entire bucket
   --cached          get only those objects from a remote bucket that are present ("cached") in AIS
   --archive         list archived content (see docs/archive.md for details)
   --limit value     limit object name count (0 - unlimited) (default: 0)
   --units value     show statistics and/or parse command-line specified sizes using one of the following _units of measurement_:
                     iec - IEC format, e.g.: KiB, MiB, GiB (default)
                     si  - SI (metric) format, e.g.: KB, MB, GB
                     raw - do not convert to (or from) human-readable format
   --verbose, -v     verbose outout when getting multiple objects
   --help, -h        show help

Example: extract one file

$ ais archive get ais://dst/A.tar.gz /tmp/w --archpath 111.ext1
GET 111.ext1 from ais://dst/A.tar.gz as "/tmp/w/111.ext1" (12.56KiB)

$ ls /tmp/w
111.ext1

Alternatively, use fully qualified name:

$ ais archive get ais://dst/A.tar.gz/111.ext1 /tmp/w

Example: extract one file using its fully-qualified name::

$ ais archive get ais://nnn/A.tar/tutorials/README.md /tmp/out

Example: extract all files from a single shard

Let’s say, we have a certain shard in a certain bucket:

$ ais ls ais://dst --archive
NAME                     SIZE
A.tar.gz                 5.18KiB
    A.tar.gz/111.ext1    12.56KiB
    A.tar.gz/222.ext1    12.56KiB
    A.tar.gz/333.ext2    12.56KiB

We can then go ahead to GET and extract it to local directory, e.g.:

$ ais archive get ais://dst/A.tar.gz /tmp/www --extract
GET A.tar.gz from ais://dst as "/tmp/www/A.tar.gz" (5.18KiB) and extract to /tmp/www/A/

$ ls /tmp/www/A
111.ext1  222.ext1  333.ext2

But here’s an alternative syntax to achieve the same:

$ ais get ais://dst --archive --prefix A.tar.gz /tmp/www

or even:

$ ais get ais://dst --archive --prefix A.tar.gz /tmp/www --progress --refresh 1 -y

GET 51 objects from ais://dst/tmp/ggg (total size 1.08MiB)
Objects:                   51/51 [==============================================================] 100 %
Total size:  1.08 MiB / 1.08 MiB [==============================================================] 100 %

The difference is that:

• in the first case we ask for a specific shard,
• while in the second (and third) we filter bucket’s content using a certain prefix
• and the fact (the convention) that archived filenames are prefixed with their parent (shard) name.

Example: extract all files from all shards (with a given prefix)

Let’s say, there’s a bucket ais://dst with a virtual directory abc/ that in turn contains:

$ ais ls ais://dst
NAME             SIZE
A.tar.gz         5.18KiB
B.tar.lz4        247.88KiB
C.tar.zip        4.15KiB
D.tar            2.00KiB

Next, we GET and extract them all in the respective sub-directories (note --verbose option):

$ ais archive get ais://dst /tmp/w --prefix "" --extract -v

GET 4 objects from ais://dst to /tmp/w (total size 259.21KiB) [Y/N]: y
GET D.tar from ais://dst as "/tmp/w/D.tar" (2.00KiB) and extract as /tmp/w/D
GET A.tar.gz from ais://dst as "/tmp/w/A.tar.gz" (5.18KiB) and extract as /tmp/w/A
GET C.tar.zip from ais://dst as "/tmp/w/C.tar.zip" (4.15KiB) and extract as /tmp/w/C
GET B.tar.lz4 from ais://dst as "/tmp/w/B.tar.lz4" (247.88KiB) and extract as /tmp/w/B

Example: use ‘--prefix’ that crosses shard boundary

For starters, we recursively archive all aistore docs:

$ ais put docs ais://A.tar --archive -r

To list a virtual subdirectory inside this newly created shard (e.g.):

$ ais archive ls ais://nnn --prefix A.tar/tutorials
NAME                                             SIZE
    A.tar/tutorials/README.md                    561B
    A.tar/tutorials/etl/compute_md5.md           8.28KiB
    A.tar/tutorials/etl/etl_imagenet_pytorch.md  4.16KiB
    A.tar/tutorials/etl/etl_webdataset.md        3.97KiB
Listed: 4 names

Now, extract matching files from the bucket to /tmp/out:

$ ais archive get ais://nnn --prefix A.tar/tutorials /tmp/out
GET 6 objects from ais://nnn/tmp/out (total size 17.81MiB) [Y/N]: y

$ ls -al /tmp/out/tutorials/
total 20
drwxr-x--- 4 root root 4096 May 13 20:05 ./
drwxr-xr-x 3 root root 4096 May 13 20:05 ../
drwxr-x--- 2 root root 4096 May 13 20:05 etl/
-rw-r--r-- 1 root root  561 May 13 20:05 README.md
drwxr-x--- 2 root root 4096 May 13 20:05 various/

Get archived content: multiple selection

Generally, both single and multi-selection from a given source shard is realized using one of the following 4 (four) options:

   --archpath value     extract the specified file from an object ("shard") formatted as: .tar, .tgz or .tar.gz, .zip, .tar.lz4;
                        see also: '--archregx'
   --archmime value     expected format (mime type) of an object ("shard") formatted as: .tar, .tgz or .tar.gz, .zip, .tar.lz4;
                        especially usable for shards with non-standard extensions
   --archregx value     string that specifies prefix, suffix, substring, WebDataset key, _or_ a general-purpose regular expression
                        to select possibly multiple matching archived files from a given shard;
                        is used in combination with '--archmode' ("matching mode") option
   --archmode value     enumerated "matching mode" that tells aistore how to handle '--archregx', one of:
                          * regexp - general purpose regular expression;
                          * prefix - matching filename starts with;
                          * suffix - matching filename ends with;
                          * substr - matching filename contains;
                          * wdskey - WebDataset key
                        example:
                          given a shard containing (subdir/aaa.jpg, subdir/aaa.json, subdir/bbb.jpg, subdir/bbb.json, ...)
                          and wdskey=subdir/aaa, aistore will match and return (subdir/aaa.jpg, subdir/aaa.json)

In particular, ‘--archregx’ and ‘--archmode’ pair defines multiple selection that can be further demonstrated on the following examples.

But first, note that in all multi-selection cases, the result is (currently) invariably formatted as .TAR (that contains the aforementioned selection).

Example: suffix match

Select all *.jpeg files from a given shard and return them all as 111.tar:

$ ais archive get ais://abc/trunk-0123.tar 111.tar --archregx=jpeg --archmode=suffix

Example: WebDataset key

Select all files that have a given WebDataset key; return the result as 222.tar:

$ ais archive get ais://abc/trunk-0123.tar 222.tar --archregx=file45 --archmode=wdskey

Example: prefix match

Similar to the above except that in this case ‘--archregx’ value specifies virtual subdirectory inside a given named shard:

$ ais archive get ais://abc/trunk-0123.tar 333.tar --archregx=subdir/ --archmode=prefix

Generate shards

ais archive gen-shards "BUCKET/TEMPLATE.EXT"

Put randomly generated shards that can be used for dSort testing. The TEMPLATE must be bash-like brace expansion (see examples) and .EXT must be one of: .tar, .tar.gz.

Warning: Remember to always quote the argument ("...") otherwise the brace expansion will happen in terminal.

Options

Flag	Type	Description	Default
--fsize	string	Single file size inside the shard, can end with size suffix (k, MB, GiB, ...)	1024 (1KB)
--fcount	int	Number of files inside single shard	5
--fext	string	Comma-separated list of file extensions (default “.test”), e.g.: --fext ‘.mp3,.json,.cls’	.test
--cleanup	bool	When set, the old bucket will be deleted and created again	false
--conc	int	Limits number of concurrent PUT requests and number of concurrent shards created	10

Examples

Generate shards with varying numbers of files and file sizes

Generate 10 shards each containing 100 files of size 256KB and put them inside ais://dsort-testing bucket (creates it if it does not exist). Shards will be named: shard-0.tar, shard-1.tar, ..., shard-9.tar.

$ ais archive gen-shards "ais://dsort-testing/shard-{0..9}.tar" --fsize 262144 --fcount 100
Shards created: 10/10 [==============================================================] 100 %
$ ais ls ais://dsort-testing
NAME		SIZE		VERSION
shard-0.tar	25.05MiB	1
shard-1.tar	25.05MiB	1
shard-2.tar	25.05MiB	1
shard-3.tar	25.05MiB	1
shard-4.tar	25.05MiB	1
shard-5.tar	25.05MiB	1
shard-6.tar	25.05MiB	1
shard-7.tar	25.05MiB	1
shard-8.tar	25.05MiB	1
shard-9.tar	25.05MiB	1

Generate shards using custom naming template

Generates 100 shards each containing 5 files of size 256KB and put them inside dsort-testing bucket. Shards will be compressed and named: super_shard_000_last.tgz, super_shard_001_last.tgz, ..., super_shard_099_last.tgz

$ ais archive gen-shards "ais://dsort-testing/super_shard_{000..099}_last.tar" --fsize 262144 --cleanup
Shards created: 100/100 [==============================================================] 100 %
$ ais ls ais://dsort-testing
NAME				SIZE	VERSION
super_shard_000_last.tgz	1.25MiB	1
super_shard_001_last.tgz	1.25MiB	1
super_shard_002_last.tgz	1.25MiB	1
super_shard_003_last.tgz	1.25MiB	1
super_shard_004_last.tgz	1.25MiB	1
super_shard_005_last.tgz	1.25MiB	1
super_shard_006_last.tgz	1.25MiB	1
super_shard_007_last.tgz	1.25MiB	1
...

Multi-extension example

$ ais archive gen-shards 'ais://nnn/shard-{01..99}.tar' -fext ".mp3,  .json,  .cls"

$ ais archive ls ais://nnn | head -n 20
NAME                                             SIZE
shard-01.tar                                     23.50KiB
    shard-01.tar/541701ae863f76d0f7e0-0.cls      1.00KiB
    shard-01.tar/541701ae863f76d0f7e0-0.json     1.00KiB
    shard-01.tar/541701ae863f76d0f7e0-0.mp3      1.00KiB
    shard-01.tar/8f8c5fa2934c90138833-1.cls      1.00KiB
    shard-01.tar/8f8c5fa2934c90138833-1.json     1.00KiB
    shard-01.tar/8f8c5fa2934c90138833-1.mp3      1.00KiB
    shard-01.tar/9a42bd12d810d890ea86-3.cls      1.00KiB
    shard-01.tar/9a42bd12d810d890ea86-3.json     1.00KiB
    shard-01.tar/9a42bd12d810d890ea86-3.mp3      1.00KiB
    shard-01.tar/c5bd7c7a34e12ebf3ad3-2.cls      1.00KiB
    shard-01.tar/c5bd7c7a34e12ebf3ad3-2.json     1.00KiB
    shard-01.tar/c5bd7c7a34e12ebf3ad3-2.mp3      1.00KiB
    shard-01.tar/f13522533ecafbad4fe5-4.cls      1.00KiB
    shard-01.tar/f13522533ecafbad4fe5-4.json     1.00KiB
    shard-01.tar/f13522533ecafbad4fe5-4.mp3      1.00KiB
shard-02.tar                                     23.50KiB
    shard-02.tar/095e6ae644ff4fd1778b-7.cls      1.00KiB
    shard-02.tar/095e6ae644ff4fd1778b-7.json     1.00KiB
...