Table of contents

AIS command-line interface (CLI) is a tool to easily manage and monitor every aspect of the AIS clusters’ lifecycle.

In addition, CLI provides dataset management commands, reading and writing primitives, and more.

Goven an existing aistore instance, maybe the very first command you execute would be ais show cluster - a variant of numerous ais show subcommands. For example:

$ ais show cluster
PROXY            MEM USED(%)     MEM AVAIL       LOAD AVERAGE    UPTIME          K8s POD         STATUS
p[DlPmJiRU]      0.01%           366.36GiB       [0.1 0.3 0.3]   526h28m20s      ais-proxy-5     online
p[JedAkLgG][P]   0.02%           366.52GiB       [0.7 0.3 0.3]   526h27m30s      ais-proxy-7     online
...
...
...

TARGET         MEM USED(%)     MEM AVAIL     CAP USED(%)   CAP AVAIL     LOAD AVERAGE    REBALANCE     UPTIME        K8s POD         STATUS
t[KoplySra]    0.03%           366.37GiB     52%           8.324TiB      [0.1 0.3 0.3]   -             526h26m10s    ais-target-1    online
t[MgHaIvNG]    0.03%           366.62GiB     52%           8.177TiB      [0.9 0.8 0.6]   -             526h27m10s    ais-target-4    online
t[WoLfoQEW]    0.03%           366.56GiB     50%           8.499TiB      [0.4 0.2 0.2]   -             526h28m30s    ais-target-7    online
t[fXFPnenn]    0.03%           366.52GiB     51%           8.347TiB      [0.7 0.3 0.3]   -             526h28m10s    ais-target-6    online
t[fwKWswQP]    0.03%           366.56GiB     51%           8.434TiB      [0.5 0.3 0.3]   -             526h27m40s    ais-target-5    online
t[tFUjHCCO]    0.03%           366.37GiB     50%           8.509TiB      [1.5 0.9 0.6]   -             526h28m40s    ais-target-8    online
t[tfNKAtFk]    0.03%           366.40GiB     52%           8.350TiB      [1.6 0.8 0.6]   -             526h26m30s    ais-target-2    online
...
...

Summary:
   Proxies:             10 (all electable)
   Targets:             10 (total disks: 30)
   Cluster Map:         version 760, UUID HCGGmT4K0, primary p[JedAkLgG]
   Deployment:          K8s
   Status:              20 online
   Rebalance:           n/a
   Authentication:      disabled
   Version:             3.22.rc2.f889d45
   Build:               2024-01-29T00:29:36+0000

Next, montoring wise, you’d maybe run ais show performance, etc.

Getting Started

To build CLI from the source, run the following two steps:

$ make cli			# 1. build CLI binary and install it into your `$GOPATH/bin` directory
$ make cli-autocompletions	# 2. install CLI autocompletions (Bash or Zsh)

To build with debug, run:

$ MODE=debug make cli

Alternatively, install directly from GitHub:

For example, the following command extracts CLI binary to the specified destination and, secondly, installs bash autocompletions:

$ ./scripts/install_from_binaries.sh --dstdir /tmp/www --completions

For more usage options, run: ./scripts/install_from_binaries.sh --help

You can also install bash and/or zsh autocompletions separately at any (later) time:

To uninstall autocompletions, follow the install_autocompletions.sh generated prompts, or simply run bash autocomplete/uninstall.sh.

Please note: using CLI with autocompletions enabled is strongly recommended.

Once installed, you should be able to start by running ais <TAB-TAB>, selecting one of the available (completion) options, and repeating until the command is ready to be entered.

TL;DR: see section CLI reference below to quickly locate useful commands. There’s also a (structured as a reference) list of CLI resources with numerous examples and usage guides that we constantly keep updating.

TIP: when starting with AIS, ais search command may be especially handy. It will list all possible variations of a command you are maybe looking for - by exact match, synonym, or regex.

See also:

The rest of the README assumes that user’s PATH environment variable contains $GOPATH/bin directory. Run export PATH=$PATH:$GOPATH/bin if this is not the case. You can find more about $GOPATH environment here.

CLI Reference

The recommended and, actually, fastest way to get started with CLI is to type ais and press <TAB-TAB>:

$ ais <TAB-TAB>

bucket           job              storage          remote-cluster   prefetch         evict            create
object           auth             archive          alias            put              rmo              dsort
cluster          show             log              ls               start            wait             search
config           help             tls              stop             get              blob-download
etl              advanced         performance      download         rmb              cp

These are the current set of top-level commands. Each command has its own extended help (the --help option) and, usually, multiple sub-commands (which, in turn, have their respective inline helps and subcommands).

The list of top-level commands must give maybe the first idea of the supported functionality and functional grouping.

Following is a brief summary (that’s non-exhaustive and slightly outdated):

Command Use Case
ais help All top-level commands and brief descriptions; version and build; general usage guidelines.
ais advanced Special commands for developers and advanced usage.
ais alias User-defined command aliases.
ais archive Read, write, and list archives (i.e., objects formatted as TAR, TGZ, ZIP, etc.)
ais auth Add/remove/show users, manage user roles, manage access to remote clusters.
ais bucket Create/destroy buckets, list bucket’s content, show existing buckets and their properties.
ais cluster Monitor and manage AIS cluster: add/remove nodes, change primary gateway, etc.
ais config Set local/global AIS cluster configurations.
ais etl Execute custom transformations on objects.
ais job Query and manage jobs (aka eXtended actions or xactions).
ais object PUT and GET (write and read), APPEND, archive, concat, list (buckets, objects), move, evict, promote, ...
ais search Search ais commands.
ais show Monitor anything and everything: performance (all aspects), buckets, jobs, remote clusters and more.
ais log Download ais nodes’ logs or view the logs in real time.
ais storage Show capacity usage on a per bucket basis (num objects and sizes), attach/detach mountpaths (disks).
ais performance Show performance counters, throughput, latency, disks, used/available capacities.
ais tls Load or reload (an updated) TLS certificate; display information about currently deployed certificates.

Other CLI documentation:

Note: In CLI docs, the terms “xaction” and “job” are used interchangeably.

CLI Config

Notice:

  • CLI configuration directory: $HOME/.config/ais/cli
  • CLI configuration filename: cli.json

For the most updated system filenames and configuration directories, please see fname/fname.go source.

When used the very first time, or if the $HOME/.config/ais/cli/cli.json does not exist, the latter will be created with default parameters:

$ ais config cli --json

{
    "cluster": {
        "url": "http://127.0.0.1:8080",
        "default_ais_host": "http://127.0.0.1:8080",
        "default_docker_host": "http://172.50.0.2:8080",
        "client_crt": "",
        "client_crt_key": "",
        "client_ca_tls": "",
        "skip_verify_crt": false
    },
    "timeout": {
        "tcp_timeout": "60s",
        "http_timeout": "0s"
    },
    "auth": {
        "url": "http://127.0.0.1:52001"
    },
    "aliases": {
        "dsort": "job start dsort",
        "prefetch": "object prefetch",
        "rmo": "object rm",
        "get": "object get",
        "ls": "bucket ls",
        "wait": "job wait",
        "create": "bucket create",
        "download": "job start download",
        "start": "job start",
        "stop": "job stop",
        "blob-download": "job start blob-download",
        "cp": "bucket cp",
        "evict": "bucket evict",
        "put": "object put",
        "rmb": "bucket rm"
    },
    "default_provider": "ais",
    "no_color": false,
    "verbose": false,
    "no_more": false
}

CLI config can be updated using ais config cli set command or even simply by changing the config file.

The next time you run it CLI will use the updated values.

To get back to system defaults, run ais config cli reset.

Environment variables

First and foremost, there’s AIS_ENDPOINT. If defined, it’ll take precedence over “cluster.url” (section CLI Config above).

Example:

$ export AIS_ENDPOINT=https://10.07.56.68:51080

In addition, environment can be used to override client-side TLS (aka, HTTPS) configuration - the knobs “client_crt”, etc. also listed in the table below:

var name description the corresponding CLI Config
AIS_CRT X.509 certificate “cluster.client_crt”
AIS_CRT_KEY X.509 certificate’s private key “cluster.client_crt_key”
AIS_CLIENT_CA Certificate authority that authorized (signed) the certificate “cluster.client_ca_tls”
AIS_SKIP_VERIFY_CRT true: skip X.509 cert verification (usually enabled to circumvent limitations of self-signed certs) “cluster.skip_verify_crt”

Further references

First steps

To get the list of supported commands, run:

$ ais help

Alternatively, you could start making use of auto-completions by typing ais and pressing TAB key two times in a row.

To check if the CLI can correctly contact the cluster and to get cluster status, run following command:

$ ais show cluster

Global options

Besides a set of options specific for each command, AIS CLI provides global options:

  • --no-color - by default AIS CLI displays messages with colors (e.g, errors are printed in red color). Colors are automatically disabled if CLI output is redirected or environment variable TERM=dumb is set. To disable colors in other cases, pass --no-color to the application.

Please note that the place of a global options in the command line is fixed. Global options must follow the application name directly. At the same time, the location of a command-specific option is arbitrary: you can put them anywhere. Examples:

$ # Correct usage of global and command-specific options.
$ ais --no-color ls ais://bck --props all
$ ais --no-color ls --props all ais://bck
$
$ # Incorrect usage of a global option.
$ ais ls ais://bck --props all --no-color

Backend Provider

The syntax provider://BUCKET_NAME (referred to as BUCKET in help messages) works across all commands. For more details, please refer to each specific command’s documentation. provider:// can be omitted if the default_provider config value is set (in such case the config value will be used implicitly).

Supported backend providers currently include:

  • ais:// - AIStore provider
  • aws:// or s3:// - Amazon Web Services
  • azure:// or az:// - Azure Blob Storage
  • gcp:// or gs:// - Google Cloud Storage
  • ht:// - HTTP(S) datasets

See also:

Backend Providers Buckets: definition, operations, properties

Verbose errors

CLI uses AIS API to execute operations on a cluster.

Of course, a remote API call - any API call, for that matter - may return errors. For developers, it may be sometimes useful to see a complete and unredacted error information.

Here’s an example where we are trying to rename a non-existing bucket:

$ ais bucket mv ais://ddd ais://mmm
Error: bucket "ais://ddd" does not exist

But here’s how it’ll look once we put CLI in verbose mode:

$ ais config cli set verbose true
"verbose" set to: "true" (was: "false")

$ ais bucket mv ais://ddd ais://mmm
Error: {"tcode":"ErrBckNotFound","message":"bucket \"ais://ddd\" does not exist","method":"HEAD","url_path":"/v1/buckets/ddd","remote_addr":"127.0.0.1:57026","caller":"","node":"p[JFkp8080]","status":404}: HEAD /v1/buckets/ddd (stack: [utils.go:445 <- bucket.go:104 <- bucket_hdlr.go:343])

CLI Help Paging

To view help content page-by-page, CLI uses the more command. Disable this by setting no_more to true in your configuration.

$ ais config cli set no_more=true
"no_more" set to: "true" (was: "false")